Menu Structure - Fluke Biomedical Raysafe 452 Benutzerhandbuch

There are two shortcuts:
• A long press on the left arrow button toggles the measurement
sound (on/off).
• A long press on the right arrow button toggles the display
backlight (on/off).
RaySafe 452 – Users Manual (EN)
All manuals and user guides at all-guides.com

Menu structure

measurements
8
Information screen with firmware version (FW), serial
About number (S/N), checksum for adjustment data (CRC),
and adjustment date (Adj.).
Select a rate alarm level: Off, Test, or a level from a
Alarm level selection spread over the range of the current rate
quantity.
Change measurement unit. Dependent on lid status.
Unit
See "Lids and quantities" on page 7.
Turn on or off the measurement sound. Each pop
Measurement sound corresponds to a discharge of the Geiger-
sound Müller pancake, to a maximum frequency of 500
pops per second.
Backlight Turn on or off the display backlight.
Measurement Current measurement parameters, default screen
screen after power on.
Access measurements stored since the instrument
Stored
was last powered on. See "Access stored
measurements" on page 6.