Ledwood XTREME 250 Bedienungsanleitung Seite 4

FUNCTION
Power ON
Power OFF
Volume +
Volume -
Play/Pause music
Previous song
Next song
Previous radio station
Next radio station
TWS Function
TWS FUNCTION
1. Turn on two identical speakers you want to pair, both under BT mode. Only need to set one of the two units.
2 Short-press the TWS button, speaker will make a tone and start to pair, a tone will be audible again when paired.
3 Make Bluetooth connection with your mobile phone to play music by the two paired Speakers to create more
powerful surround sound effect.
4 When you want to exit the TWS mode, short-press the "TWS" button again.
5 Once two units paired with TWS, when they both are turned on next time within effective range, they will be
automatically paired again (When two units TWS connected, if you manually operate to disconnect the TWS
connection, next time when you turn on the two units, they will not automatically paired again).
PLAYING MUSIC FROM USB DISK
1 Turn the Power button to "ON".
2 Insert USB flash disk into slot, the speaker will play the stored music automatically.
3 Under playing mode, long-press Forward or Backward button to select songs you like, short-press to adjust the
volume up and down.
4 Short-press Play/Pause to play or pause.
REMARK
Under Bluetooth playing mode, insert USB disk will disconnect the Bluetooth and switch to play the
USB disk. You can short-press the MODE button to switch to Bluetooth mode again.
FM RADIO
1 Turn the power button to "ON", press the "MODE" button to FM state.
2 Short press "Play/Pause" button to mute the speaker, long press "Play/Pause" button to auto search the FM
Channel and store it automatically.
3 Long press Forward or Backward button to change the stored FM channel.
4 Short press Forward or Backward button to adjust the volume.
AUX-IN
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from
the device's "Line Out" to the "Aux In" of this device, then enjoy...
When using an external device, all functions can be controlled by the external device.
Under any playing mode, when you use the audio cable to connect the device, it will auto-switch to the AUX mode.
RGB LIGHTING
The RGB light is on when speaker powered on, user can short-press the RGB Light button to turn the three different
light modes and turn it off.
4
TOUCH
Long press
Long press
Short press
Short press
Short press
Long press
Long press
Long press
Long press
Short press
BUTTON
1
1
6
7
4
7
6
7
6
2