Werbung
L
1
2
Mount the SMART CANBUS (load resistor) to the vehicle's body (metal).
Please note:
Pull the cable ties until they are taut.
3
1.
Connect the SMART CANBUS (load
resistor) plug to the vehicle connector.
2.
Connect the SMART CANBUS (load
resistor) socket with the headlight.
For questions regarding maintenance or technical problems, please contact OSRAM customer service via
automotive-service@osram.com .
Installation instructions for electronic load resistor
6)
4
5)
9)
1)
LEDSC02-1
ON
ON
4
Werbung
