Maintenance & Servicing; Troubleshooting - Viesta H-Serie Gebrauchsanleitung

IMPORTANT: Please remove all packing material and foils from the heating panel
before usage.
1) To avoid the possibility of burns, the following people should be much more careful
when using the heaters: infants and kids, people with sensitive skin, the old, the sick,
intoxitaded or people on medication.
2) Do not damage or destroy the power cord. Do not change, bend, stretch or press the
power cord, or else it may cause fire or electric shock.
3) Be sure the usage voltage is between 220-240V,50Hz(or 60Hz). 12V or 24V is not
compatible.
4) The heaters will draw more current than small appliances, so a separate socket is
required.
5) Keep it away from flammable products, or else it may cause fire.
6) Keep it away from furniture or curtains. Do not use the heater on or under the carpet.
7) Safe distance: 30cm distance in all directions
8) Please do not jump or stand on the panel, do not apply strong pressure on it.
9) Do not heat at same part of the body for long time, or else it may cause slight burns.
10) Never cover the heater with anything with good preservation of heat, such as towels,
quilts or carpets.
11) To avoid electric shock or burns and other accidents, be sure to unplug the power cord
and wait until the heater is completely cooled if cleaning is needed, use dry fabric to
clean the heater, gasoline or acetate is forbidden.
● Infrared heating panels require little maintenance or servicing.
● It is forbidden for laypeople to dismantle or repair the heater as this may cause fire,
electric shock or other accidents.
Problem
It Makes noise when
charged with electricity
The surface of the panel
was slightly raised.
The surface of the heating
panel is slightly warm.
WARNING & PRECAUTION
MAINTENANCE & SERVICING

TROUBLESHOOTING

Reason
Due to the structure of the
heat insulator.
Due to the thermal expansion
of the surface material
1. The voltage is low.
2. In a low-temperature
environment.
[ EN ● 5 ]
Version: 8.0
Measure
It is a normal reaction.
Don't worry about it.
It is a normal reaction.
Don't worry about it.
1. Install a voltage regulator.
2. Use higher voltage.
14.09.2017