Hornbach SMART.HOME Schnellstartanleitung Seite 9

ROUTER
1. Assembly
a Remove the ID code from the housing cover
and stick it into this field.
b Connect the router to your gateway. Use the
connector in the middle and the supplied LAN
cable for this.
c Connect the device with the power cable and
plug the connector into the socket.
d It takes approx. 5-10 minutes for all LEDs on
your gateway (except the Bluetooth LED) to
light up green. The gateway is then ready for
operation.
16
1a
Affix the ID code here
1b 1c
2
www.hornbach.com
2. Creating a customer account
a If you have not already done so, create a customer
account at hornbach.com
Then log in with your HORNBACH customer account
b
and select "My Smart Home" below "My Account".
Confirm the SMART HOME by hornbach terms and
c
conditions and privacy policy.
d
You will receive an e-mail with the link to the Smart
Home registration. Please follow the steps from the
email and Smart Home login page.
17