Product Description And Specifications; Additional Warnings - Casals SA400 Bedienungsanleitung

Dear Customer,
Many thanks for trusting to Casals.
Thanks to its continuous effort, our innovation and the
strictest quality controls, Casals Power Tools, S.L.
develops electric Power Tools for the toughest jobs.
PRODUCT DESCRIPTION AND

SPECIFICATIONS
A Start-up switch
B Lock Button
C Jig Saw Blade
D Shoe
E Dust extraction connector
F Set of screws
G
Guide roller
H Set of screws
I Allen Wrench
J Saw blade holder
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
ADDITIONAL

WARNINGS
- Ensure that the use resulting sparks not be- come
dangerous, for example, that they don't reach people
or ignite flammable substances.
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plug- ging in the
appliance.
- Connect the appliance to a socket that can supply a
minimum of 10 amperes.
- Only use the appliance with the specific electric
connector provided.
- Do not wrap the power cord around the appli- ance.
- Do not touch the plug with wet hands.
- Disconnect the appliance from the mains when not
in use and before undertaking any cleaning task.
- This appliance is for household use only, not
professional, industrial use.
- This appliance is intended for adult use. Ensure that
this product is not used by the disabled, children or
people unused to its handling.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
 INSTRUCTIONS FOR USE
BEFORE USE
- Make sure that all the product's packaging has been
removed.
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plug- ging in the
appliance.
- Ensure that the selected tension on the voltage
selector coincides with the tension of the mains.
- Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
FITTING THE ACCESSORIES
- Unplug the appliance from the mains.
- Loosen the set off screws using the Allen wrench
- Slide the saw blade up to the stop in the saw blade
holder
- Make sure that the back of the saw blade enga- ges
in the slot of the guide roller
- Tighten the set of screws firmly.
- Regularly check that the saw blade is fastened firmly.
If necessary, fasten de set of screws. Only carry out this
operation when the machine is unplugged.
SAFETY
USE
- Before connecting the power cord to the mains
power supply ensure the switch is in the off position.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off switch (A)
- Always keep the base flat against the work- piece.
Failure to do so may cause a blade breakage resulting
in a serious injury.
- Allow the jig saw to reach it's maximum speed before
commencing work.
CUTTING ANGLE SETTING (FIG. 3)
- Loosen the set off screws (H) using the Allen
wrench (I)
- Tilt the shoe (D) to the required miter angle. (0-
45º left or right).
- Tighten the set of screws (H) firmly.
FRONT FLUSH CUTS (FIG 4)
- Loosen the set off screws (H) using the Allen
wrench (I)
- Slide the shoe (D) all the way back.
- Tighten the set of screws (H) firmly.
CURVED CUTS