Dymo LetraTAG QX50 Bedienungsanleitung Seite 12

No display
Check the machine is on
Check batteries and replace if necessary
No response to keys
Remove the batteries for a few minutes then
re t. The machine will now reset.
No printing or poor text
Check batteries and replace if necessary
Check tape cassette is installed correctly and
not empty. Clean print head (see "Cleaning).
Print contrast
For use under extreme temperature or
humidity conditions.
Press + +
SPACE
PRINT
The display will show the ve contrast
symbols
Use Q or R to select lighter or darker then
press to set
Jammed tape
Lift out the cassette and carefully release
jammed tape. Cut o excess tape and
re t/replace the cassette.
No success?
Call the customer service telephone - see
warranty booklet
Cleaning
Check and clean the print head regularly to
ensure optimum print quality, using the
cleaning tool supplied (see Fig D).
12