Dymo LetraTAG QX50 Bedienungsanleitung Seite 10

LTQX50 WEU.qxd
Note: if you want to change the language
settings, press LANG (
scroll through the language list. Press
to select your language.
Printing labels
Previewing your label(s)
Before printing, you can preview the text you
have typed. Press PREVIEW (
and the label will scroll over the display once.
Reviewing the text in the buffer
You can also review all the text stored in the
LetraTag buffer. Press REVIEW (
and the entire text of the buffer will scroll
across the display.
Printing a label
Make sure the cursor is inside the text of the
label you want to print, and press
During printing the message Print... will be
displayed.
Printing multiple copies of a label
Your LetraTag can print up to nine copies of a label.
To print more than one copy of your label,
press COPIES (
n=1 will appear on the display. Use H or P
on the navigation key to increase or reduce
the number of copies. Press
this menu to print the selected number of
copies.
12-09-2002 11:07
+ ) and
caps
+ ),
PRINT
+ ),
CANCEL
.
PRINT
+ ). The message
STYLE
while in
PRINT
Pagina 10
When printing multiple copies of a label, a
vertical chain mark will be printed between
the labels.
Cutting your label
The cutter button is on the left of your
machine. To cut a label push the cutter
inwards (Fig E). The label backing is split
down the middle for easy removal.
Feeding extra tape through
Press FEED ( +
section (12mm, 1/2 inch) of blank tape
through the mechanism.
10
) to feed a short