Bestron WINTER WARM ACH1800DZR Bedienungsanleitung Seite 10

OPERATION
The appliance is intended only for domestic use, not for professional use.
The following description is associated with image 1 on page 2:
1. Display
2. Touch panel
A. Power button
B. Function button
- Anti-frost
- Ventilation
- Warm (900W)
- Hot (1800W)
C. Shutdown timer
D. Eco mode
Unpack the device and remove all packaging parts.
PLEASE NOTE:
• Do not cover the appliance to avoid overheating.
• Do not use this appliance in the immediate vicinity of a bath, shower or swimming pool.
• Under the base is a tip-over protection that ensures automatically switching off as soon as the appliance
falls over or is not properly or sable on the surface.
Switching on the appliance
Place the appliance on a stable surface and make sure that the air inlet (5) and the air outlet (4) are clear.
Insert the plug (7) into the socket. Switch on with the On/Off button (6) on the back of the appliance. A short
signal sounds and the pilot light in the display (1) starts flashing. Press the Power button (A).
Anti-Frost function
The appliance starts automatically in the Anti-Frost mode. This function keeps the temperature at 7°
Celsius.
Select function
Make sure the appliance is operating. Use button B to select a function. See page 2.
PLEASE NOTE:
You cannot set a temperature when the appliance is in ventilation mode. After all, the appliance only
ventilates. Any attempt to do so will stop the ventilation. You must then manually switch to ventilation mode
again.
Set temperature
Make sure the appliance is operating in warm or hot mode. Use the F and G keys to set the temperature.
Shutdown timer
Make sure the appliance is operating. Select a function. Set the temperature. Use the C button (the display
starts flashing) and then the F and G buttons to set the switch-off time (0 to 24 hours). After approx. 5
seconds, the set temperature becomes visible again. The appliance switches off automatically after the set
time.
Eco mode
By switching on the Eco mode (D), the appliance determines itself which heating mode is needed to
approach and maintain the set temperature as closely as possible.
Swing function
Switch on the swing function with button E. Press again to switch off the swing function.
CLEANING AND MAINTENANCE
1. Unplug the appliance and let the appliance cool down.
2. Clean the outside of the housing with a damp cloth.
3. Wipe the housing dry with a soft cloth.
PLEASE NOTE:
• Do not use aggressive or abrasive cleaning agents or sharp objects (such as knives or hard brushes)
when cleaning.
E. Swing function
F. Reduce temperature/time
G. Increase temperature/time
3. Integrated handle
4. Air outlet
5. Air inlet
6. On/Off button
7. Plug cuble
8. Base
9. Remote control
10
EN