Swann SWIFI-ISIREN Schnellstartanleitung Seite 3

1 Make sure the siren is within range of the Wi-Fi network to which you want to connect.
2 Connect the siren to the universal power adapter using the power extension cable, then plug the
universal power adapter into a power outlet, as shown below.
3 The siren's status LED glows blue when power is connected.
POWER THE SIREN
depending on your country.
Plug adapter easily slides into
place and can be changed by
sliding the button above the plug.
Power extension cable
Universal power adapter
Plug adapter will vary
To power outlet
EN
3