Workplace Requirements; Transport; Power Supply - HOLZMANN-MASCHINEN BS 115 Betriebsanleitung

In the end, the band saw is placed on the base and fastened with screws.
Screw the suspension
The spring bracket is screwed as shown on the console

13.3 Workplace requirements

The workplace has to fulfill the requirements.
The ground has to be even, in level and hard. It must be suitable at least to weight it with double
weight per square meter than the machines net weight.
The chosen workplace must have access to a suitable electric supply net hat complies with the
machines requirements.

13.4 Transport

The machine can be transported in package with a forklift.
The machine is very heavy. The machine shall be lifted from crate with a suitable lifting device only
that is certified to be able to carry the machines load.
The lifting and transportation of the machine must only be carried out by
qualified staff and must be carried out with appropriate equipment.
Note that lifting equipment used (crane, forklift, sling, etc.) must be in perfect condition.
To maneuver the machine in the packaging can also a pallet jack or a forklift be used.
Uncoated metal machine parts have been insulated with a greasy layer to inhibit corrosion.
This layer has to be removed. You can use standard solvents that do not damage the machine
surface.

13.5 Power supply

When working with non-grounded machines:
Severe injury or even death may arise though electrocution!
Therefore: The machine must be operated at a grounded power socket
HOLZMANN MASCHINEN GmbH
A T T E N T I O N
www.holzmann-maschinen.at
W A R N I N G
42
BS115 / BS128HDR