Seite 2
EINBAUHINWEISE Der erste Schritt bei der Installation der Lautsprecher sollte die sorgfältige Planung sein. Folgen Sie einfach diesen Vorschlägen um das bestmögliche Resultat zu erreichen. 1. Wählen Sie eine Position für die einzelnen Komponenten, bei der das Signal am besten ohne Hindernisse im Fahrgastraum verteilt wird. Be- achten Sie dabei auch die Position der Sitze, Nackenstützen und anderer Aufbauten im Innenraum.
Seite 4
ANSCHLUSSDIAGRAMM ML6.2C LINKS RECHTS ML2X ML2X ML6.2W ML6.2W ML6.2T ML6.2T LAUTSPRECHER- AUSGÄNGE VERSTÄRKER WICHTIG: Bitte achten Sie unbedingt auf die korrekte Polarität (+ oder –) aller Anschlüsse und Verbindungen.
Seite 5
ANSCHLUSSDIAGRAMM ML6.3A ACHTUNG: Im aktiven Betrieb ohne Frequenzweiche müssen Sie unbedingt die angegebenen Frequenzbereiche beachten. Zu tiefe Frequenzen beschädigen die Lautsprecher. LAUTSPRECHERAUSGÄNGE VERSTÄRKER Empfohlene Übergangsfrequenzen: 400 Hz @ 12dB 3800 Hz @ 12dB LINKS RECHTS ML6.LW ML6.2W ML3M ML3M ML6.2T ML6.2T WICHTIG: Bitte achten Sie unbedingt auf die korrekte Polarität (+ oder –)
INSTALLATION NOTES The first step of installing a speaker system is thorough planning. Choose a suitable location for your speaker components carefully. Follow these sug- gestions to ensure proper imaging and maximum performance: 1. Choose a location that offers the least amount of obstruction between the components and your ears.
SPECIFICATIONS ML6.2W ML3M 16,5 cm (6.5“) Midbass Woofer 7,5 cm (3“) Midrange Speaker Power Rating RMS 100 Watts Power Rating RMS 60 Watts Power Rating max. 200 Watts Power Rating max. 120 Watts Impedance 4 Ohms Impedance 4 Ohms Frequency Range 50 - 5000 Hz Frequency Range 200 - 10000 Hz Aluminum Cone Paper Cone...
Seite 8
CONNECTION DIAGRAM ML6.2C LEFT RIGHT ML2X ML2X ML6.2W ML6.2W ML6.2T ML6.2T SPEAKER OUTPUTS AMPLIFIER IMPORTANT: Please pay attention to the correct polarity (+ or -) for all terminals and connections.
Seite 9
CONNECTION DIAGRAM ML6.3A ATTENTION: In active operation without a crossover, it is essential to observe the specified frequency ranges. Too low frequencies damage the speakers. SPEAKER OUTPUTS AMPLIFIER Recommended Crossover Frequencies: 400 Hz @ 12dB 3800 Hz @ 12dB LEFT RIGHT ML6.LW ML6.2W...