Messingschlager anlen SL Bedienungsanleitung Seite 18

5. Specification
Item
Product
Unfolded size
Folded size
Height from pedal to ground
Net weight
Capacity
Moto power
Mileage per charge
Max speed
Max loading
Climbing angle
Input voltage
Frequency
Output voltage
Output current
Store temperature
15
inch
8.5
Scooter Specification
1073*420*1176mm
1073*420*450mm
110mm
12.5kg
Basic Information
36V 6.4Ah
250W/350W
up to 25km
25km/h
100kg
15°
Charger Specification
100-240Vac
50-60Hz
42V
1.5A / 2A
-10℃-35℃
6. Maintenance
Maintenance considerations
● Make sure the electric scooter charger and charging line are disconnected and ensure that the
electric scooter is off.
● Wipe the shell with a soft cloth to clean the electric scooter. Please don't put more lubricating oil
on bearing when you do the maintenance for it.99%, Please stop charging; long time over charge
will affect the battery life
Warning
● It is forbidden to clean electric scooters by using water cannon or soaking in liquid. This will cause
permanent damage of the electronic devices in the host.
Storage
● Please charge your electric scooter before storage, for preventing the battery from discharging
too long time. Please ensure charge at least once every three months.
● If the storage environment temperature is lower than 0 °C, please don't charge electric scooter.
Please put it in inside environment temperature (above 10 °C) and then charge, storage temperature
is - 10 °C to 35 °C.
● Please keep the electric scooter in a suitable place indoor, dry and appropriate temperature. You
can mask the electric scooter to prevent from the dust.
Warning
● In order to protect the user's safety, the user can not take apart the electric scooter, otherwise, the
user will give up the maintenance warranty rights of the product automatically.
16