Before The First Use; Intended Use; Explanation Of Symbols; Safety Instructions - Rollei weeylite ninja 400 II Anleitung

Before the First Use

18
Read the operating instructions and the safety instructions carefully before using the
device for the first time .
Keep the operating instructions together with the device for future use . If other people
use this device, make this manual available to them . If you pass on the device to a
third party, this manual belongs to the device and must be supplied with it .

Intended Use

This device is designed for photo and video lighting only . It may not be used for other
purposes, and especially not for domestic room lighting .

Explanation of Symbols

The following symbols are used in this manual, on the LED light or on the packaging .
Products marked with this symbol comply with all relevant community regu-
lations of the European Economic Area .
Products marked with this symbol are operated with direct current .
Products marked with this symbol are operated with alternating current .
Products with this symbol have additional or reinforced insulation and com-
ply with protection class II .
For indoor use only . Devices with this symbol may only be operated indoors
(dry environment) .
Products marked with this symbol have a positive polarity . They may only be
connected to products that also have a positive polarity .

Safety Instructions

Danger from electric current!
• Faulty electrical installations or excessive mains voltage can cause electric shock .
• Only connect the product if the mains voltage of the socket
corresponds to the specifications on the type plate .
• Connect the product to an easily accessible power outlet so that you can quickly
disconnect it from the mains in case of problems .
• Use only the supplied AC/DC adapter and cables .
• Before disconnecting the power supply, switch off the device at the main switch .
• Do not use the product if it is visibly damaged or if the cable is defective .
• If the product or its accessories are damaged, they must be replaced or repaired by
the manufacturer, its service department or a similarly qualified person to prevent
hazards .
ENGLISH