Maintenance - HoMedics FM-CR-2EU Handbuch

HM7656 FM-CR-2EU_IB.qxd:Layout 1
INSTRUCTIONS FOR USE:
Always ensure the appliance is set to the 'OFF' before inserting the plug into a mains outlet.
1. Plug the appliance into a 230V mains outlet and switch on.
2. Place the massager on the floor in front of your chair.
3. To activate the massage, press the 'Power' button once. The LED light will illuminate blue to
confirm your selection.
4. Position your feet over the rotating massage heads, applying a level of pressure that feels
comfortable for you. It is highly recommended that this appliance is used with socked feet.
5. To activate the Infrared heat with the massage, press the 'Power' button a second time. The
LED light will illuminate red to confirm your selection (fig.2).
6. To switch off, press the 'Power' button till the massage heads stop moving.
NOTE:
• DO NOT attempt to stand on this Foot Massager. Use only while seated.
• The Heat function will only work when the massage is in use.
• DO NOT use the massage or heat functions continuously for more than 20 minutes.

MAINTENANCE:

Cleaning
Unplug the appliance and allow to cool before cleaning. Clean only with a soft, slightly
damp sponge.
• Never allow water or any other liquids to come into contact with the appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.
Storage
Place the appliance in its box or in a safe, dry, cool place.
To avoid breakage, DO NOT wrap the cord around the appliance or hang the unit by the cord.
Plug (MODEL FM-100H-2GB ONLY)
If the plug on this appliance is damaged, it can be replaced with a BS 1363 plug, fitted with a
3A BS 1362 fuse. Only use a 3amp fuse with this appliance.
Care must be taken when changing the plug.
If in doubt, contact a qualified electrician.
23/1/07 18:00 Page 5
5