Seite 3
All manuals and user guides at all-guides.com Bedienungsanleitung/Instruction Manual EK 60/19-L D-42855 Remscheid EK 60/19-L Nennspannung (Voltage): 18V DC Preßkraft (Force): 60 kN Preßbereich: 6-240 mm² Cu (standard) (Range): 6-185 mm² Cu DIN 46235 10-240 mm² Al datecode 304711CV142 batch# e.g. 304711 Year Code Month Code Month Code datecode e.g.
Seite 6
All manuals and user guides at all-guides.com Bedienungsanleitung/Instruction Manual EK 60/19-L Bild/pic./fi g. 21 on / off Tab. 1 Wann/When Warum/Why nach Arbeitsvorgang after working cycle 20 sec nach Einsetzen des Akkus Selbsttest after inserting the battery Self check nach Arbeitsvorgang after working cycle 20 sec/2Hz während der Übertemperatur...
All manuals and user guides at all-guides.com Bedienungsanleitung EK 60/19-L Inhaltsangabe 3. Beschreibung des elektro- hydraulischen Presswerkzeugs Einleitung Sachmängelhaftung 3.1 Beschreibung der Komponenten Beschreibung des elektro- Das elektro-hydraulische Presswerkzeug ist ein handge- hydraulischen Presswerkzeugs führtes Werkzeug und besteht aus folg. Komponenten: Beschreibung der Komponenten Tab.
All manuals and user guides at all-guides.com Bedienungsanleitung EK 60/19-L 3.2 Kurzbeschreibung der wesentlichen 3.3 Beschreibung der Werkzeugindikation Siehe Tabelle 1. Leistungsmerkmale des Werkzeugs Das Presswerkzeug besitzt einen automatischen Es sollte vor Arbeitsbeginn der Ladezustand des Akkus Rücklauf, der den Kolben nach Erreichen des max. (Bild 1.2) überprüft worden sein.
Garantieanspruch. den. Lassen Sie Ihr Werkzeug nur von qualifi ziertem Fachper- Kontaktadresse: sonal und nur mit Originalersatzteilen reparieren. Damit WEEE-Abholung@Klauke.Textron.com wird sichergestellt, dass die Sicherheit des Werkzeuges erhalten bleibt. Anmerkung Diese Bedienungsanleitung kann jederzeit kos- 4.5 Verhalten bei Störungen am Werk- tenlos unter der Bestell-Nr.
All manuals and user guides at all-guides.com Instruction Manual EK 60/19-L Index 2. Warranty If the tool is operated according to its intended Introduction use and the regular maintenance services are Warranty observed our warranty is 24 months from the Description of the electric-hydraulic time of delivery.
All manuals and user guides at all-guides.com Instruction Manual EK 60/19-L 3.2 Brief description of the important 3.3 Description of the tool indication See Tab. 1. features of the unit Prior to operating the unit the charging level of the battery The hydraulic unit incorporates an automatic retrac- (pic.
Do not damage the seals of the tool. If the seals tool recycled environmental friendly. are damaged the warranty is invalidated. Kontaktadresse: 4.5 Troubleshooting WEEE-Abholung@Klauke.Textron.com a.) Constant fl ashing/indicating of the light diode display Attention (pic 1.1) or the occurence of an acustical warning Additional instruction manuals are available signal.
Seite 13
EN 60745-1, EN 12100 Teil 1 + 2, EN ISO 13857, EN 349, EN 60204-1, EN 28662-1, EN 61000-6-3, EN 61000-6-2, EN 60529, EN 1037 ja vastaa säädoksiä 2006/42/EU, 2004/108/EU Gustav Klauke GmbH • Auf dem Knapp 46 • D-42855 Remscheid Telefon ++49 +2191-907-0 • Telefax ++49 +2191-907-141 • www.klauke.textron.com...