Crown CT44088-R Originalbetriebsanleitung Seite 25

ble horizontal misalignment can be compensated
with the laser head self-levelling system (not ex-
ceeding ±4°)�
After finishing work turn off the appliance as
•
described above (lock 6 shall be in the position
as shown in fig. 9.2 and laser beams must be
off)�
• It is recommended to put the appliance for
long-term storage and transportation into bag 18�
Ensure that there are no moisture drops on the
appliance elements (if necessary, wipe with a soft
cloth), after that put the appliance into bag 18�
Marking inclined lines (see fig. 9.2, 12)
In order to tilt the appliance, it's
recommended to mount it on a tri-
pod 21 that can tilt (tripod 21 is not
included in delivery set).
Attention! Do not mark horizontal
and vertical lines in this mode -
the position of the respective laser
beams may be incorrect.
• Mount appliance on tripod 21 (not included in
delivery set)�
• Set lock 6 to position as shown in fig. 9.2.
Press and hold the function switch 3 for a long
•
time (see fig. 12.1). Indicator 2 will glow red and
laser beams will blinking every 5 seconds� Also
indicators 10 lighting on� Laser power is now
on, but the suspension gear of the laser head is
locked� You can switch on and off the laser beams
pressing on / off switches 1, 9 or 11�
Gently tilt the appliance to the desired angle
•
(see fig. 12.2).
• After finishing work turn off the appliance -
press and hold the function switch 3 for a long
time� Indicators 2 and 10 goes out, also power of
all lasers will be turn off�
Outdoor mode
The outdoor mode is designed for operation in
bright conditions (for example, in bright sun-
light)�
Attention: outdoor mode can be
enabled only in the self-levelling
mode, also in this case, the ad-
justment of the power of the laser
beams does not work.
The manufacturer reserves the possibility to introduce changes.
To work in this mode, it is recom-
mended to use a special laser
glasses, laser target plate 14 or la-
ser receiver (not supplied).
• Turn on the appliance in self-levelling mode as
described above�
To turn on the outdoor mode, press and hold
•
the function switch 3 for a long time� When this
mode is enabled, all indicators 10 will start blink-
ing�
• To turn off the outdoor mode, press and hold
the function switch 3 for a long time�
Maintenance / preventive measures
Cleaning the appliance
• Keep the appliance clean� Do not use caustic
substances or solvents�
• Emitter windows shall be cleaned with a soft
cloth� Do not use sharp objects or corrosive
agents for this purpose�
After-sales service and application service
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts� Information about
service centers, parts diagrams and informa-
tion about spare parts can also be found under:
www.crown-tools.com�
Transportation
Categorically not to drop any mechanical im-
•
pact on the packaging during transport�
• When unloading / loading is not allowed to use
any kind of technology that works on the principle
of clamping packaging�
Environmental protection
Recycle raw materials instead of
disposing as waste.
Appliance, accessories and packag-
ing should be sorted for environment-
friendly recycling�
The plastic components are labelled for catego-
rized recycling�
These instructions are printed on recycled paper
manufactured without chlorine�
English
25