Topmatic AF-1450M Bedienungsanleitung Seite 13

8. Some ingredients require shaking halfway through the preparation time. To
shake the ingredients, pull the pan out of the appliance by the handle and -
without removing the tray from the pan-shake the contents using the handle.
Finally, slide the pan back into the air fryer to resume.
9. When you hear the bell, the set time has elapsed. Pull the pan out of the
appliance and place it on a heat-resistant surface.
Note: You can also switch off the appliance manually. To do this, turn the
temperature control knob to 0.
10. Check if the ingredients are ready. If the ingredients are not ready yet,
simply slide the pan back into the appliance and set the timer to a few extra
minutes. After air frying, the pan and the ingredients will be hot. Depending on
the type of ingredients in the air fryer, steam may escape from the pan.
Tip: Use tongs, a serving spoon, or similar to aid the removal of fragile or large
amounts of ingredients.
11. You don't need to wait to use the air fryer again straight after cooking a set
of ingredients. There may be an excessive amount of oil or remnants in the pan
after several cycles, or certain types of food, which you may want to remove
before continuing to fry. In such a case, wait for the appliance to cool down and
follow the correct procedure outlined in the "Cleaning" section.
12. If you want to remove the handle and fascia from the pan, press the release
button and remove on an angle.
Automatic Switch-Off
This appliance is equipped with a timer. When the timer has counted down to 0,
the appliance produces a bell sound and switches off automatically. To switch
off the appliance manually, turn the timer knob anticlockwise to 0. The Air Fryer
will automatically if the Pan is removed during the cooking cycle and
then the both lights are turning off. Once replaced back into the fryer, the unit
will continue its cooking cycle and then the lights come on.
Cleaning
Clean the appliance after every use to avoid oil and remnants building up.
The pan has a non-stick coating. Do not use metal utensils or abrasive
cleaning materials to clean them, as this may damage the coating.
1. Remove the mains plug from the wall socket and let the appliance cool down.
Note: remove the pan and baking tray to let the air fryer cool down more quickly.
2. Wipe the outside of the appliance with a moist cloth. Note: you should use a
dry cloth to clean the light area.
3. Clean the pan and the baking tray with hot water, some washing-up liquid
and a non-abrasive sponge You can use a degreasing agent to remove any
remaining deposits.
4. Clean the inside of the appliance with hot water and a non-abrasive sponge.