SOFTWARE (FIRMWARE) UPDATE
Method of Upgrade:
1
Unzip, set name of the CD volume to "FERGUSON" (all capital letters) and burn the disc
(the disc must be finalised).
1.
3.
2
After CD loading "Upgrade file detected, press play to upgrade" appears on TV screen.
3
Press "PLAY"
4
The software upgrading takes a few minutes to be complete.
5
When the software is successfully upgraded, the set restart.
6
The CD tray opens itself. Remove the CD.
7
Restore default settings (Menu Preference > Default > Reset).
Note: The software version can be checked on TV screen.
8
On remote control, press "SETUP" button.
9
Goto to the bottom of GENERAL SETUP PAGE
10 Enter VERSION menu item.
11 Check "Version" (first line). Last two characters indicates version number.
2
2.
4.