Troubleshooting - Melissa 16350026 Bedienungsanleitung

7. The appliance switches off
once the cooking time has
lapsed.
Adjusting the cooking time
for an automatic programme
1. Switch the appliance on by
pressing the ON/OFF button
(12).
2. Set the timer as described
above.
3. Press the button for the
required programme (3-8)
within 5 seconds while the
cooking time is still flashing
on the display. The cooking
time for the programme is
saved in the memory as
long as the appliance is
connected to the power.
Switching the appliance off
Switch the appliance off by
pressing the On/off button (12).
NB! The fan continues to
run for a short time after the
appliance has been switched
off. Only unplug the appliance
once the fan has stopped
so that you are sure that
the appliance has cooled
sufficiently.
UK

TROUBLESHOOTING

In some cases, an error
message may appear on the
display. The table below shows
how the errors should be dealt
with.
Display Problem
shows...
E0 No or unsuitable
pan on hotplate
E1/E2 Voltage too high/
low
E3 Overheating error
E6 The sensor un-
der the pan has a
circuit error/short-
circuit
E7 Boil-dry protection
E8 Error in main sen-
sor
CLEANING
Always switch off the appliance
at the socket, unplug it and
allow it to cool before cleaning
it.
Clean using a damp cloth
and, if necessary, a little
detergent. If necessary, use
a special cleaning agent for
glass-ceramic hobs. Follow the
instructions on the container.
47