Safety Instructions; Declaration Of Conformity - Bascom XD10 Montageanweisung

Carefully follow the operating instructions when connecting this product.
Keep all parts of the product out of the reach of children.
Do not drop the product and do not shake the product. A rough treatment could damage the
internal electronic switch and the fine mechanics.
Always use the included power supply units to provide the product with power.
Prevent overload of wall sockets and extension cords.
Clean only the exterior of the product, with a soft, dry cloth.
Before cleaning the product, remove the product from the power source.
Do not use aggressive chemicals, solvents or strong detergents to clean the product.
Contact your supplier if you have any doubts about connecting the product, the product safety
or the operating mode of the product.
This product complies with the applicable CE marking directives and harmonized standards:
2014/30/EU (EMC) and 2011/65/EU (RoHS). A copy of the declaration of conformity can be found
on our website: www.bascom-cameras.com/conformity/IPX

Safety Instructions

Bascom products are designed and tested to meet strict safety requirements.
Carefully read the instructions below before you start working with the
products and, if necessary, consult the instructions again, so you are always
using the product safely.

Declaration Of Conformity

Bascom Camera's B.V.
Zoomstede 25
3431 HK Nieuwegein
The Netherlands
1
English