Waldmann ZAPP!18 Gebrauchsanweisung Seite 23

Product description
Assembling the wall mount
WARNING
Risk of injury from falling device.
If the device is not mounted properly, it
may fall down and cause personal injury
and material damage.
X Mount only on a wall which is suit-
able for mounting.
X Use suitable screws and dowels
only.
X Use the supplied wall mount only.
WARNING
Lateral UV scattered radiation.
Staying too close to the sides of the
device for extended periods of time can
cause eye and skin damage.
X Position the device at a height of at
least 2.0 m or keep a distance of
1.3 m to both sides.
Fig. 6: Orientation of the wall mount.
1. Ensure the correct orientation of the
wall mount, see Fig. 6.
NOTE: Mount the device at a height
of at least 2.0 m so that it is not pos-
sible to look directly into the interior of
the device.
2. Fix the wall mount at the desired height.
3. Slightly loosen the screws on the back
of the device, do not unscrew them.
Fig. 7: Hang the device in the wall mount.
4. Hang the device in the wall mount and
retighten the Allen screws, see Fig. 7 .
Assembling the stand holder
1. Slightly loosen the screws on the back
of the device, do not unscrew them.
2. Hang the device in the stand holder.
3. Tighten the screws again.
ENG
23