LEFF amsterdam tubeaudio Bedienungsanleitung Und Garantie Seite 15

English
Connecting via Bluetooth
Make sure that the tube audio is fully charged.
1. Turn on the tube audio by pressing briefly. In case of first
use, the tube audio automatically goes to the pairing-mode and
the Bluetooth indication LED will blink.
2. Go to the Bluetooth settings on your device (phone, tablet,
laptop, etc.) and look for new Bluetooth devices.
3. Select 'tube audio' from the list of Bluetooth devices and con-
nect. Piet will now say: "Your device is connected".
The Bluetooth indication LED is now constantly turned on.
Your device is automatically stored in the memory of the tube
audio. The tube audio can store 8 devices.
The tube audio is now ready to play your favorite music!
Use and to regulate the volume.
Remark: The pairing-mode remains active for 5 minutes. If, within
this time, no connection is made, the tube audio will automatically
switch off.
Disconnecting Bluetooth
End the current Bluetooth connection by briefly pressing .
Piet will now say: "Your device is disconnected."
The tube audio will go to the pairing-mode again and is ready for
a new Bluetooth connection.
17