User Interface - Ivoclar Vivadent Programat P510 Kurzanleitung

2. User interface

The Programat P510 has a wide-screen colour display. The keypad and the
touch screen allow user-friendly handling. By tapping slightly with your finger-
tips on the touch screen, the buttons are activated and the furnace performs the
requested function.
Keypad:
Home
Returning to Home screen (main menu)
Power-saving key
This key activates the power-saving function.
Open furnace head
START (Start LED)
Starts the selected program. The green LED indicates that a pro-
gram is running. If the program is paused (1 x STOP), the Start LED
flashes until renewed pressing of START results in the program being
resumed.
All manuals and user guides at all-guides.com
Programat
P510
POWER
SAVING
P
PREDRYING
Program key
Farben Frontfolie :
= Ausstanzung
Pressing once: The currently selected program is
1.99 FFR = RAL 7012 Basaltgrau 0505.7012.000.00
2.99 FFR = RAL 5002 Ultramarinblau 0505.5002.000.00
displayed.
3.99 FFR = RAL 6024 Verkehrsgrün 0505.6024.000.00
4.99 FFR = RAL 3020 Verkehrsrot 0505.3020.000.00
5.99 FFR = RAL 7035 Lichtgrau 0505.7035.000.00
Pressing twice:
6.99 FFR = RAL 9016 Verkehrsweiß 0505.9003.000.00
7.99 FFR = RAL 1018 Zinkgelb 0505.1018.000.00
8.99 FFR = RAL 2003 Pastellorange 0505.2003.000.00
The program selection via number entry is accessed.
9.99 FFR = RAL 6024 Verkehrsgrün 0505.6024.000.00
10.99 FFR = RAL 3020 Verkehrsrot 0505.3020.000.00
11.99 FFR = RAL 5002 Ultramarinblau 0505.5002.000.00
12.99 FFR = RAL 7035 Lichtgrau (Hinterdruck) 0505.7035.000.00
13.99 FFR = RAL 9016 Verkehrsweiß Verschwindeef. 0505.9003.444.72
IRT key
With this key, the infrared image of the object can be
displayed during the closing process.
Close furnace head
STOP
A running program can be paused by pressing the
STOP key and terminated by pressing the key twice.
Movement of the furnace head can be stopped at any
time by pressing STOP. Acoustic signals can be turned
off by pressing the STOP key.
T S O P
START
Hinweise :
Abmessungen siehe Fertigungszeichnung
Farben der Zeichnung entsprechen nicht den Siebdruckfarben
Kunden-Artikel Nr. : P510
L = Lochpfeife %%c= 2.8 Maße ohne
Maßstab Oberfläche: -
Toleranzangabe:
= Fanger %%c= 6 H7
1:1 Werkstoff: Siehe Stückliste
bis 300 %%P0,2
Format
Werkzeug-Nr.: -
über 300 %%P0,3
A3
Datum Name
1059.0013.001.99
Projekt-Nr.:
Gez.
19.07.16 SJ
Gepr.
19.07.16 SJ
Druckzeichnung
Bezeichnung:
d110.2604_Modi_99_-
Zeichn.-Nr.:
Index Änderung Datum Name Es gilt Urheberschutz nach DIN 34 Blatt 1 von 1