Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
o Operating instructions
USB 3.2 Gen2 NVMe M.2 SSD docking station
with clone function
Item no. 2372773
Intended use
The product is intended for quick connection of up to two SSD modules (M.2 PCIe NVMe, not
included) to a computer without laborious installation of SSDs in a casing.
Data connection takes place via USB-C
The computer recognises both SSDs separately, so the product replaces two individual SSD
casings.
SSDs can also be cloned without the product being connected to a computer.
Power is supplied via the included power adapter.
The product is intended for indoor use only and must not be used outdoors. Contact with
moisture, for example, in bathrooms, must be avoided.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such , as a short circuit, fire or electric shock. Read the operating
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Docking station
• Power adapter
• USB cable (USB Type-C
to USB Type-C
TM
• USB cable (USB Type-A to USB Type-C
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
Description of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
The product should only be used in dry, indoor locations. It must not get damp or
wet.
The product is designed according to protection class II.
Safety information
Read the operating instructions carefully and observe in particular the safety
instructions. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) Power adapter
• The power adapter is manufactured according to Protection Class II. Only connect
the power adapter to a standard mains socket connected to the public supply grid.
• The mains socket must be located near the product and be easily accessible.
• If the power adapter shows signs of damage, do not touch it, there is a risk of
death from an electric shock!
(USB 3.2 Gen2, max. 10 GBit).
TM
, approx. 80 cm)
TM
, approx. 80 cm)
TM
Fully disconnect the mains voltage for the mains socket to which the power
adapter is connected (e.g. turn off the corresponding circuit breaker or unscrew
the fuse, and then turn off the residual current circuit breaker). Unplug the mains
adapter from the mains socket and take the product to a specialist repair centre.
• Check the power adapter for damage before each use!
• If you detect any damage, DO NOT connect the product to the mains supply!
Danger of death!
b) General information
• Ensure suitable protective measures are taken against static charge (e.g. ground
strap, non-conductive pad, etc.) when touching or inserting the SSD modules.
• Only grasp the SSD modules on the side of the circuit board, do not touch the
components on the circuit board. Electrostatic discharges can destroy the SSDs.
• The product is only suitable for dry, enclosed indoor areas. It must be protected
from moisture and dampness; never touch it with wet hands!
There is a risk of fatal electric shock!
• This product is not a toy. Keep it out of the reach of children and pets. There is a
danger of life-threatening electric shock!
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• If you have any questions that are not answered in the operating instructions,
please contact our technical department or another specialist.
Product overview
DC IN
E
A "Source HDD1" - M.2 NVMe connector 1
B "Target HDD2" - M.2 NVMe connector 2
C Clone/Copy button
D LED status indicator for cloning
E "DC IN" - USB-C
port for power supply
TM
F "PC" - USB-C
port for connection to the computer
TM
A
B
C
D
PC
F
Werbung
Inhaltsverzeichnis
