Werbung
Verfügbare Sprachen
Verfügbare Sprachen
First Time Installation
If everything is connect-
ed properly, the right
signal source has been
selected and the power
supply LED on the re-
ceiver stick lights up,
you will see the follow-
ing installation menu on
the TV screen. Use the
arrow keys
navigate among menu items. If a menu item is high-
lighted you can use the ◄/► keys to make changes.
OSD Language:
Set the OSD language.
Country
Select the country in which the receiver is to be oper-
ated.
Antenna Power
In case your antenna needs to be supplied with power
(e.g. an indoor antenna with an amplifier but no power
supply unit) by your receiver you need to activate this
function in the menu.
Channel Search
Initiate the scan mode by pressing OK. It can take a
couple of minutes to complete the scan.
In case not all channels appear in the list after the
scan you need to readjust the antenna or use a more
powerful antenna and repeat the scan mode.
Note:
After moving to another region you have to repeat
the scan mode.
▲/▼
to
EN 7
Werbung
