Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Compact handheld vacuum cleaner
Item No. 2338743
Intended use
This compact handheld portable vacuum cleaner is intended for indoor use only. The vacuum
is equipped with a long suction nozzle and brush for cleaning hard to reach spaces. Do not
use this product outdoors. Contact with moisture, e.g. in bathrooms, must be avoided under
all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described, the product may be damaged. In addition,
improper use can result in short circuits, fires, electric shocks, or other hazards. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Vacuum cleaner
• Tube/brush
• Woven bag
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
-
Is visibly damaged
-
Is no longer working properly
-
Has been stored for extended periods in poor ambient conditions
-
Has been subjected to any serious transport-related stresses
• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product. Consult an expert when in doubt about
the operation, safety, or connection of the appliance. Maintenance, modifications,
and repairs must only be completed by a technician or an authorised repair centre.
If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Caution:
To avoid damaging the components, do not attempt to open or repair the
product without professional guidance. The operating range may be affected by
environmental factors and nearby sources of interference. Proper use helps to
prolong the lifespan of the product.
• USB cable
• Operating instructions
b) Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
c) LED light
• Attention, LED light:
- Do not look directly into the LED light.
- Do not look into the beam directly or with optical instruments.
• This product is a class III appliance which must only be supplied with a safety
extra-low voltage corresponding to the marking on the appliance. This instruction
is not necessary for battery-operated appliances if the battery is a primary battery
or secondary battery charged outside of the product.
Operating elements
6
5
3
2
1
1 Brush accessory switch
2 Long suction nozzle
3 Dust collecting cover
4 Power indicator
5 LED light button
6 Vacuum switch button
Operation
Precautions before operation:
-
Before first use, check that the parts are assembled correctly. Pay close attention to the
filter assembly in the dust box.
-
Charge the unit after use or after extended periods of storage. The last blue power indicator
light (4) will flash rapidly when the battery is low.
-
The vacuum cannot be turned on when the battery is charging.
-
This product is not waterproof or designed for liquids. Avoid sucking up liquids, especially
flammable and explosive substances such as chemical solvents or alcohol.
-
Do not vacuum or suck up hot substances (such as burning cigarette butts or hot ash) to
avoid damaging the filter or plastic parts.
-
If there is an abnormally loud sound during use, discontinue use immediately and check if
the filter is missing. If the filter is not missing, contact the after-sales department for further
assistance.
-
Store the product in a cool place when not in use. Do not store at ambient temperatures of
more than 60°C as this constitutes a fire hazard.
Instructions for use:
Vacuum function:
-
Remove the cover.
Press and hold the vacuum switch button (6) for about one second to turn the vacuum on.
-
The vacuum is equipped with a long suction nozzle and brush for cleaning hard to reach
spaces. Clean the dust collecting cover after use.
Lights:
-
To activate the LED lighting feature (7), press the LED light button (5).
-
To make the LED lighting feature (7) flash, press the LED light button (5) again.
-
To turn off the LED lighting feature (7), press the LED light button (5) again.
-
To activate the LED lighting feature's hazard warning light, press and hold the LED light
button (5) until a red flashing light is visible. To turn off the hazard warning light, press the
LED light button again.
Note: To facilitate the use of the hazard warning function, this product has a magnet inside the
cover allowing it to be placed upside down on magnetic materials such as the roof or rear of
a vehicle.
Charging the battery:
Note: After use, the vacuum must be left to cool down for approximately 10 minutes before
charging.
-
When the last blue power indicator light (4) flashes rapidly, the product needs to be charged
before it can continue to be used.
-
To charge the product, use a standard Type-C charging cable. It is recommended to use
a charger with an output voltage of 5.0 V/DC and current of 2 A to charge the product.
7
8
9
4
10
11
12
7 LED lighting feature
8 LED light cover
9 Rear air outlet
10 Type-C charging port
11 Side air outlet
12 Cover
Werbung
Inhaltsverzeichnis
