Samsung 4+-Serie Bedienungsanleitung Seite 12

Issues
No Picture, No Video
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
The TV will not turn on.
• Try pressing the
• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
The TV turns off automatically.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an aerial or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal.
• Check cable connections (remove and reconnect all cables connected to the TV and external devices).
• Set your external device's (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
There is no picture/video.
• Make sure your connected devices are powered on.
• Be sure to select the TV's correct source by pressing the
• Reboot the connected device by reconnecting the device's power cable.
Aerial (Air/Cable) Connection
• Make sure the Aerial cable is connected securely.
• Please try Setup (Initial setup) to add available channels to the channel list. Go to
The TV is not receiving all channels.
• Verify the Aerial is positioned correctly.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and
The picture is distorted: macro block
error small block, dots, pixelization
• A low signal can cause picture distortion. This is not a TV issue.
Others
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
The picture will not display in full
• Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
screen.
• Adjust the picture size options on your external device or TV to full screen.
• Plasma TVs typically make a soft humming sound. This is normal. It's caused by the electrical charges that are used to
• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower.
Plasma TV is making humming noise.
• You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try
• Improper installation of wall mount can create excessive noise.
• To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology. Pixel
Image Retention (Burn In) Issue.
• Replace the remote control batteries with the poles (+/–) in the right direction.
The remote control does not work. • Clean the sensor's transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
doesn't turn the TV on or off, or
adjust the volume.
A "Mode Not Supported" message
• Check the supported resolution of the TV, and adjust the external device's output resolution accordingly.
appears.
All manuals and user guides at all-guides.com
POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to "The
remote control does not work" below.
input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.
setup) and wait for all available channels to be stored.
action movies.
create the images on the screen.
rerouting your connection cables.
Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The
regular, slight movement of the picture reduces screen burn in.
the SAMSUNG TV code.
English - 12
Solutions and Explanations
SOURCE button on the remote control.
MENU - System - Setup (Initial