Werbung
Verfügbare Sprachen
Verfügbare Sprachen
14320 Double Saxophone Stand
-For Eb-Alto and Bb-Tenor Sax
-Folds up small
-Exclusive non-marring plastic coating
-Adjustable support arms
-Peg holders can be added for other instruments
Instructions for Assembly and Use
Fig. A
-Fold out the legs and the two bases (1) until they lock into place.
-Insert instrument support tubes (2) as far as they will go into the
-bases and secure them with the knurled-head screws (5).
-Lock the lower support arm bracket (3) into the respective hole
-in the support tube (2) for your type of instrument.
Fig. B (Option 1)
-The support tubes can be set up in any direction by using the
-plastic ring (see examples B).
-CAUTION: Be sure that the instruments will not bump into one
-
another!
Fig. C (Option 2)
-Put the little nose of the support tube (2) in the appropriate hole
-in the socket. The support tube rests fixed and cannot be turned
-(see example C).
Fig. D
-By carefully bending it, adjust the upper support arm 4 to the
-bell size of your instrument.
Fig. E
-A slight tilt in the upper support arm matches the shape of most
-instruments, providing an even better fit.
Accessories (not included with the stand):
-The Double Saxophone Stand can also be equipped with pegs
-for flugelhorn, trumpet, soprano saxophone or clarinet.
Important Information:
If you place the stand inside your house, it may be advisable to
put a non-sliding pad under the stand's rubber end caps
as they could leave marks on sensitive floors, for example par-
quet flooring.
Fig. A
4
3
2
1
Fig. B
Fig. C
example B
5
example C
Fig. D
Fig. E
-14320.000.55-
-03.80.665.00- 5/06
Werbung
