Intended Use; Technical Data - Fuxtec FX-DH116 Original Bedienungsanleitung

Training:
The use of the device only requires appropriate instruction by a competent person or the
user manual. Special training is not necessary.
12.

Intended use

The DH series oil burners are to be used exclusively for indirect heating and drying in
well-ventilated rooms or dry outdoor areas, at a safe distance from burning materials as
well as people and living beings. Make sure that the surface is stable and horizontal during
operation. Only diesel is permitted as fuel.
Safety devices:
The oil heating burner is equipped with an electronic flame monitoring system. If one or
more malfunctions occur, this will cause the device to stop. If the oil burner overheats, an
overheating thermostat will intervene and stop the fuel supply; the thermostat will reset
itself when the temperature of the combustion chamber has fallen to the maximum
permitted value. Before restarting the oil burner, the cause of overheating must be found
and eliminated (e.g., clogging of the air intake or outlet or stoppage of the fan). To restart
the device, follow the instructions in the "Startup" section.
13.

Technical data

Model: FX-DH116
Engine power fan:
Fan power:
Chimney connection diameter:
Fuel supply:
Consumption:
Electrical supply:
Air pressure adjustment range: 0,31
Electrical input power:
Weight without fuel:
Tank capacity:
Product size:
Original User Manual FUXTEC FX-DH116_rev03
30kW
750m³/h
120mm
Diesel
2.4kg/h
220V-240V/50Hz
230W
21 kg
38L
880*456*590mm
23