Dansk; Troubleshooting - Ozoneair PURIFY GO & PLUS Bedienungsanleitung

1 1
TROUBLE SHO OTING
Problem Possible reason
The product is not turned on
Product not starting
The power cord is not properly connected
Electrical outlet is not working
Display does not work
The product has not been activated
Low air flow
Fan is blocked
HEPA filter is full
Product starts but no UV light is visible Delay function is active
UV lamps are consumed
Treatment does not start
The treatment is started automatically
after a few seconds
E N
16
Solution
Turn on the product by pushing menu
button or on remote
Check to see that the power cord is
properly connected
Try another electrical outlet
Push menu button to start the product
Make sure the fan input or output is not
blocked
Replace HEPA filter
Wait for delay function to disable or
remove by push and hold Timer button
(delay symbol disappears).
Replace UV lamps
When treatment is running the menu
button is encircled by a blue light
PURIFY GO & PLUS
D A N S K