Inactive Display; Locking Times Of The Display - Keytec physiokey Bedienungs- Und Gebrauchsanleitung

Inactive Display

To prevent accidental activation of the touchscreen, the touchscreen functions are subsequently
locked if they are not used for a specific period of time. If one section of the touchscreen controls
is inactive, the following symbol is displayed at the bottom of the screen:
Additionally, the locked buttons turn white.
Briefly press the "Home" button once to reactivate the touchscreen display. If the display is
activated, press the "Home" button once to return to the main menu.

Locking Times of the Display

Already after 4 seconds, only the plus and minus buttons remain active to adjust the energy set-
ting. If the energy setting is not changed for 9 seconds, all touchscreen controls are locked and
the display brightness is reduced. Press the "Home" button to fully reactivate the touchscreen
controls.
2021-07-20
The physiokey is controlled via the specially shaped control
ellipse. This control ellipse is designed in such a way that
accidental changes of the selected parameters can almost be
excluded. The following controls are available:
Touchscreen controls and display
(see section: Touchscreen controls)
"Home" button with on/off function
Page 41