Veet Infini'Silk Pro Bedienungsanleitung Seite 21

Note: A LAMP CARTRIDGE should also be replaced if large spots appear
inside it or if its TREATMENT SURFACE is broken.
To replace a LAMP CARTRIDGE:
1. Press the ON/STBY SWITCH to turn Veet Infini'Silk™ Pro to STBY mode.
2. Unplug the power adaptor from the electrical outlet.
3. Grasp the used LAMP CARTRIDGE on both sides, pull it out of the socket.
4. Unwrap a new LAMP CARTRIDGE or the PRECISION LAMP CARTRIDGE.
5. Push the new LAMP CARTRIDGE or the PRECISION LAMP CARTRIDGE gently into place.
Note! After replacing the lamp cartridge with a new one, always set the energy to be
one level lower than your normal setting. Raise the energy level back, only if you do
not experience abnormal discomfort during or after the treatment.
The PRECISION LAMP CARTRIDGE contains light pulses. With its smaller treatment
surface, the PRECISION LAMP CARTRIDGE is designed for smaller body areas and the face.
As the PRECISION LAMP CARTRIDGE does not include a SKIN COLOUR SENSOR, you
must first confirm that the area to be treated passes the Skin Colour Sensor test by
pulsing it with the larger cartridge.
21