Get Started - Veet Infini'Silk Pro Bedienungsanleitung

9. Get started!

1. Remove Veet Infini'Silk™ Pro HAIR REMOVAL device and other components from box.
2. Verify that the LAMP CARTRIDGE for legs and body is inserted properly at the tip of
the device. If you would like to use the smaller, precision lamp cartridge for use on
upper lip, cheek, or chin, follow the replacement instructions.
3. Plug the ADAPTOR cord into the Veet Infini'Silk™ Pro HAIR REMOVAL DEVICE socket.
4. Plug the ADAPTOR into an electrical outlet. The STAND BY INDICATOR LIGHT will
turn on.
Your Veet Infini'Silk™ Pro is now ready to start.
Treat with Veet Infini'Silk™ Pro safely and properly!
Choose areas to treat that have not had recent exposure to the sun.
5. The skin of the treatment areas should be shaved, clean, dry and free of any
powders, antiperspirants or deodorants. Do not wax, pluck or tweeze the hair out
before using the Veet Infini'Silk™ Pro device. Shaving is an important step to get the
results you want!
6. Press the ON/STBY SWITCH. The POWER ON INDICATOR LIGHT (orange) will turn
on and a fan sound (similar to the sound of a hairdryer) will start.
7. Approximately 3.5 seconds after pressing the ON/ STBY SWITCH, the two READY
INDICATOR LIGHTS (green) will turn on. The device is then ready for you to trigger
the first pulse at the lowest energy level.
8. Before each treatment, choose the energy level. Veet Infini'Silk™ Pro offers 5 levels
of energy from 1 (the lowest) to 5 (the highest). To choose the right energy level
for your first treatment, test each treatment area separately:
15