Installation Of Batteries; Basic Operation; First Time Setup - Nikkei NF4321SMART Bedienungsanleitung

LED COLOR TV

1.5. Installation Of Batteries

2. Basic Operation

2.1. Turning the TV On and Off
Press the Power button on the remote control.
You can also use the Power Button on the bottom of the TV.
* If there is no input signal within 15 minutes, TV will be turned off automatically.

3. First Time Setup

Connect an RF cable from the TV's input called "RF-In" and to your TV Aerial socket.
Press OK button to select the "Start the setup".
1. Press button to select the language.
/
2. Press button to select the country.
/
3. Press button to select the time zone.
/
1. Open the back lid of the remote control.
2. Install two 7#(AAA)1.5V batteries.Ensure
the correct polarity of the batteries.
3. Cover the back lid.
Please take out of the batteries from the
remote control for long time of no use.
If the remote control doesn't work properly
please carry out the following checks.
- Check the TV is turned on.
- Check the polarity of the batteries are
correct.
- Check the batteries are not drained.
- Check the power supply is normal or the
power cord is correctly connected.
- Check there are no special fluorescent light
or neon light around.
11