Overmax Soundbeat 5.0 Bedienungsanleitung Seite 9

Alternatively, press the mode changing button and select SD. After you
have chosen this mode, the loudspeaker will start playing music from the
memory card.
EN
Bluetooth mode
Switch the loudspeaker on. In your mobile device, enter Bluetooth settings
and find available devices. You will see „Soundbeat 5.0" in the list – select
this device from the list to make connection.
If your mobile device does not detect any loudspeaker, press and hold the
pairing key longer (2 in fig. 1)
If the pairing procedure is successful, you will hear a short beep. If the
pairing procedure is not completed, switch the loudspeaker off and back
on. After successful pairing procedure, your mobile device will connect to
the loudspeaker automatically.
Radio mode
Switch the loudspeaker on. Select radio with the mode changing button. To
start searching for available radio stations automatically, press and hold the
button (9) on the remote control. The stations will be saved automatically. To
switch between stations, use or . To start searching for radio stations
manually, press and hold or .
External disk mode
Switch the loudspeaker on and connect the external disk. The loudspeaker
will start playing music from this device automatically.
Alternatively, press the mode changing button and select U-DISK. After
selecting this mode, music will be played from the device connected.
Charging:
To charge the device battery, connect a micro USB wire to the loudspeaker port
and then connect it to the source of power. LED light glows in red – the device
is charging the battery. LED light glows in blue – the device battery is full.