Herunterladen Inhalt Inhalt Diese Seite drucken

Wetecom QK-8SH-T Bedienungsanleitung Seite 5

4-wege lautsprecherschaltbox
Inhaltsverzeichnis

Werbung

1
2
3
(z Ω)
(z Ω)
(z Ω)
(z Ω)
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
ON
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
OFF
ON
ON
OFF
ON
OFF
ON
OFF
ON
ON
ON
ON
ON
All manuals and user guides at all-guides.com
Anschluss
Connection
4
Impedanz in
Es werden 4 Lautsprecherpaare angeschlossen. Jeder der 8 Lautsprecher
hat eine Impedanz von 8 Ω (z = 8).
220
Werden nur die Paare 2 und 3 eingeschaltet, liefert die Schaltbox eine
z
Gesamtimpedanz von 4 Ω (z / 2). Werden die Paare 1 und 2 eingeschaltet,
z
liefert die Schaltbox 16 Ω (z x 2). Werte aus Kombinationen, welche die
z
Impedanz eines einzelnen Lautsprechers unterschreiten, sind rot markiert.
ON
z
Die Impedanz der verwendeten Lautsprecher sollte mindestens der doppel-
ten Mindestimpedanz des Verstärkers entsprechen. Dadurch sinkt die
z x 2
Impedanz niemals unter den zulässigen Minimalwert des Verstärkers.
ON
z x 2
z / 2
ON
z / 2
4 Pairs of speakers are connected. Each of the 8 speakers has an imped-
z / 2
ance of 8 Ω (z = 8).
ON
z / 2
If only pair 2 and 3 are turned on, the switchboard has a combined imped-
ance of 4 Ω (z / 2). If pair 1 and 2 are turned on, the switchboard has a
z - 1/4z
combined impedance of 16 Ω (z x 2). Values resulting from combinations,
ON
z - 1/4z
which under run the impedance of one speaker are marked red. The imped-
ON
z - 1/4z
ance of the speakers should be equal to at least twice the minimum imped-
ON
z - 1/4z
ance of the amplifier. This way the impedance can not fall under the allowed
ON
z
minimum value of the amplifier.
Erklärung der Tabelle mit Beispielen:
Explanation of the Table with Examples:
IV
Max. 2 x 100 W

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

53 49 74

Inhaltsverzeichnis