Replacement Of Consumables - Ohyama IC-FAC2 Bedienungsanleitung

K

Replacement of Consumables

Please follow the instructions below for replacing the mesh dust filter, mesh exhaust filter, and battery.
■ Dust Filter Replacement
※※Please see P7 "Waste Removal" for how to remove filter set.
Remove the dust filter.
① Hold the filter cap with fingers.
② Turn the dust mesh filter until latches no longer line up.
③ Remove the filter from the filter cap.
Insert new dust filter.
① Line up the latches, insert the new mesh filter, and
twist to lock into place.
②Press the filter in the dust cup until it clicks into place.
■ Exhaust Filter Mesh Replacement
Remove exhaust filter cover.
① Turn the filter cover counterclockwise.
② Remove.
① Turn
Filter Cover
Change exhaust filter.
Remove filter and insert new filters.
※ Side with a hole is placed facing inwards.
Replace filter cover.
Place filter cover back on the vacuum and turn it
clockwise to lock into place.
Remove
②
Installation
Remove
②
Filter Cover
9
Filter Cap
③
Latch
Mesh Filter
①
②
Latch to line up
Filter Cover
New Filter
Side with a hole is
placed facing inwards.
Replace
IC-FAC2
Latch