Titanium 050X Bedienungsanleitung Seite 21

It can't work if feeding
paper follows with dra-
wing paper.
Some scrapped paper lock automatic
inductive device.
Some paper is in the entry,
but shredder does not
work.
After feeding paper, any corner of the
paper is inserted, but the rest doesn't
touch automatic inductive device.
The paper is jammed, and
the machine stops rotating.
1. The number of the inserted paper
is larger than the limitation
2. Locked rotor makes the motor
overheated and then temperature
protection set takes action.
The machine doesn't start
after inserting a sheet of
paper, or stop running
when paper is being
inserted.
The paper is too thin, too soft, humid,
or too crinkly to activate automatic
inductive device.
Set the slide switch to "REV".
1
Adapt to the position of the feeding
1
paper and make it touch the auto-
matic inductive device.
Set the slide switch to "REV" and
1
withdraw the shredding paper.
Unplug the plug and let the machi-
2
ne stop for a while.
Fold the paper and then insert it.
1
2
Set the slide switch to "REV".
050X
21