Modster M560 Betriebsanleitung Seite 15

User Manual MODSTER K10
4.3 Charging step
Open the charging port cover, Make sure the charging port is clean and dry.
°C
Connect the chargerwith the battery and the other end with power
(100V-240V;50/60Hz), make sure the charging indicator is on.
When the charger indicator is red, it will charge normally. Otherwise, please check
if the plug is connected properly. When the charger indicator is green, charging is
complete.
Charging method:
Battery inteface
Charging port
Tips:
Connect the charger to the AC power firstly, then connect it to the battery when
the green indicator light is normally an.
After charging, cover the dustproof rubber to prevent something from entering
the charging port and causing battery failure.
www
15
www.modster.at