Declaration Of Conformity; Kurzanleitung; Bestimmungsgemäße Verwendung - nedis WIFILOFC20FBK Kurzanleitung

2. Switch the sensor on or off.
3. Set the detection distance.
4. Set the detection sensitivity.
5. Set the light duration after detection.
PIR sensor stand-by light (WIFILOS20FBK
only)
1. Activate the Slight bright option in the sensor control menu
2. Set the stand-by light brightness.
3. Set the stand-by light duration.
The product enters stand-by mode after the full light
4
duration.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product
WIFILOFC20FBK / WIFILOFS20FBK from our brand Nedis
produced in China, has been tested according to all relevant
CE standards and regulations and that all tests have been
passed successfully. This includes, but is not limited to the RED
2014/53/EU regulation.
The complete Declaration of Conformity (and the safety
datasheet if applicable) can be found and downloaded via:
nedis.com/wifilofc20fbk#support
nedis.com/wifilofs20fbk#support
For additional information regarding the compliance, contact
the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
c

Kurzanleitung

Intelligentes
WLAN-Flutlicht
Weitere Informationen finden Sie in der
erweiterten Anleitung online: ned.is/wifilofc20fbk
ned.is/wifilofs20fbk
Bestimmungsgemäße Verwendung
Das WLAN-basierte Flutlicht von Nedis dient zur Beleuchtung
von Innen- und Außenbereichen.
Dieses Produkt ist zur Verwendung drinnen und draußen
gedacht.
7
,
®
WIFILOFC20FBK
WIFILOFS20FBK