Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Field of application:
The devices are suited only for distributing radio and television signals in the
house! If the device is used for other purposes, no warranty is given!
The application examples show a terrstrial distribution (1) as well as the
feeding of terrestrial signals into Multiswitches (2).
Equipotential bonding and mounting:
To avoid dangerous overvoltages (attention: risk of fire/death), the devices
must be connected to the equipotential bonding according to EN 60728-11.
Use the equipotential bonding connection attached to the device (3).
Use the mounting screws included in the delivery and the mounting holes
of the devices (4).
4
3
RF Installation:
Connect to the amplifier inputs the respective terrestrial antenna. Note: A
correct function can only be guaranteed, once the correct antenny-type is
connected to it.
input LMK/UKW (TVS 1-00)
input UKW (TVS 5-00)
input B I (TVS 3-00 5-00)
input B III (TVS 1-00 and TVS 5-00)
input B IV-V (TVS 1-00 and TVS 5-00)
Connect the output of the amplifier with the antenna wall outlets or the
tabs, which are used.
Use a highly shielded coaxial cable with IEC connectors. Suited cables and
plugs can be found in the current AXING catalogue or at www.axing.com.
All manuals and user guides at all-guides.com
1
LMS/FM antenna
FM antenna
VHF I antenna
VHF III antenna
UHF antenna
2
Level Adjustment:
The input levels of the amplifier TVS 5-00 for FM, BI, BIII and BIV-V can be
individually adjusted with the four attenuators (5).
5
Werbung
