Operation; Cleaning & Maintenance - Lacor 69260 Gebrauchs- Und Instandhaltungsanleitung

CLEANING / MAINTENANCE
1.- After correctly installing the device, plug it into an electrical outlet.
2.- Select the bread toasting level by turning the time selector.
3.- Insert the bread and lower the start lever. The heating will begin automatically and light
CANCEL button will turn on.
NOTE:
Make sure the crumb tray is well positioned.
4.- Once the process has finished, the slice of bread will rise automatically.
5.- Press the CANCEL button to halt the process.
6.- Press the REHEAT button if you would like to reheat bread, or the DEFROST button to defrost
bread.
CLEANING / MAINTENANCE
1.- Always turn off and unplug the machine before cleaning. Wait until the inside is no longer hot.
2.- Never use any chemical or abrasive products. Do not use a brush or any other type of utensils
which could damage the different parts and surface of the slicer.
3.- Remove the crumb tray and empty it into a trash or container.
4.- Use a damp cloth with detergent to clean the machine and then dry it.
ATTENTION:
5.-
This machine is not waterproof.
30
Do not put the machine directly into any container with water in it.