Werbung
All manuals and user guides at all-guides.com
1. Right click on "My Computer".
2. Select "Manage" in the pop-up menu.
3. Select "Disk Management".
You should see a list of available storage devices.
4. Check, whether your drive is listed.
5. Right click on the right hand box and select "Delete Partition" in
the pop-up menu.
6. Right click on the box ad select "Create New Partition" in the pop-
up menu.
7. Then select "Primary Partition" in the partition wizard window.
Click "next".
8. A drive letter will be displayed, which you can change. Click "next".
9. "Confirm" to format the drive.
As I try to format the drive, I receive the message "Could not
complete format".
A: This can be caused by formatting the drive with FAT file system.
Try "NTFS" file system. This should solve the problem.
The drive seems to be operating slower than 480 Mbps (USB 2.0
specification).
A: Make sure that you are using a USB 2.0 port, and not the old V1.1
standard.
There are some possibilities, like available CPU resources, other
connected USB devices at the same time which may cause some
slower operation than the ideal 480Mbps/s.
13
EN
Werbung
Kapitel
Fehlerbehebung
