How To Scan - C-Pen LingoPen Schnellstartanleitung

where the text cursor is positioned. It is thus
possible to scan text directly to text editors, like
MS Word, Google Doc and others, and spread-
sheets. In this mode it is important that the
computer system keyboard (e.g. MAC OSX and
Windows) is set to same language as the Lingo-
Pen.
Press MENU button to access language settings.
Charge
When Charge is selected, LingoPen works in
stand-alone mode just as if not connected to
the computer at all.
This mode has no options or settings.

How to scan

Look at the front page of this guide for refer-
ence on how to hold the pen. For best scanning
result the pen shall be held almost straight up.
Make sure no buttons except Scan Trigger is
pressed during a scan.
The pen scans one (1) text line each time and
this text line shall be centered in between the
two white nibs in the front end. Scanning start
and stop points are aligned with the edge of the
transparent window.
When the Scan Trigger gets in touch with the
paper, the scan light lits up. Start moving the
pen straight along the text line at a steady
pace, avoid stops, do not rotate the pen, and
keep the text line in between the nibs.
Left/Right hand setting *must* be correct, but