Marquant MCR-1311 Bedienungsanleitung Seite 6

BASIC OPERATION
Setting the general
Touch icon in the screen to enter setting mode, as below picture. You can touch the screen to set
up the audio, display, time parameters etc.
General Setup
This item is for Selecting a General.
The time required for 12 hours,24 hours;
1.
Hour system or choice
2. /
ON OFF Beep.
Display Setup
This item is for Selecting a
You can adjust each item by pressing the
icon or in the touch screen.
-Brightness: 00~50
-Color:00~50
-Saturation:00~50
Click the icon "
Bright
to access the System Default setup .
Audio Setup
This item is for Selecting a
You can adjust each item by pressing the
icon or in the touch screen.
-BASS: -7 / +7
-TREBLE:-7 / +7
-LOUD: ON/OFF
-Click the "Left/Right "to access the
Balance Setup.
-Click the "Front/Rear "to access the
Fader Setup.
Click the icon "
POP
After finishing setting, click the icon
IR Sensor
Receiver for wireless IR remote control.
& display & audio
Display .
Soft Stand Custom
Audio .
LEFT
ROCK JAZZ CLASS CUSTOM
to exit the menu setup interface.
setup
"
FRONT
RIGHT
REAR
" to access the EQ setup .
00 10