Herunterladen Inhalt Inhalt Diese Seite drucken

Inventum HB180G Gebrauchsanleitung Seite 15

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• This heated overblanket may only be used in conjunction with the
control specified on the label.
• This heated overblanket must only be connected to the mains voltage
that is specified on the label.
• The electrical and magnetic fields emitted by this heated overblanket
may interfere with the function of a pacemaker. However, they are
still well below the limits: electrical field strength: max. 5000 V/m,
magnetic field strength: max. 80 A/m, magnetic flux density: max. 0.1
millitesla. Please therefore consult your doctor and the manufacturer
of your pacemaker before using this heated overblanket.
• Do not pull, twist or make sharp bends in the cables.
• If they are not positioned properly, there may be a risk of becoming
entangled in, being strangled by, tripping over, or stepping on the cable
and control of the heated overblanket. The user must ensure that
excess lengths of cable, and cables in general, are safely routed.
• Please check this heated overblanket frequently for signs of wear and
tear or damage. If any such signs are evident, if the heated overblanket
has been used incorrectly or if it no longer heats up, it must be
checked by the manufacturer before being switched on again.
• Under no circumstances should you open or repair the heated
overblanket (including the accessories) yourself because faultless
functionality can no longer be guaranteed thereafter. Failure to
observe this will invalidate the warranty.
• The appliance may not be used with an external timer
or a separate remote control.
• If the mains connection cable of this heated overblanket is
damaged, it must be disposed of. If it cannot be removed, the heated
overblanket must be disposed of.
• When this heated overblanket is switched on:
– Do not place any sharp objects on it
– Do not place any heat sources, such as hot water bottles, heat pads
or similar, on it
• The electronic components in the control warm up when the heated
overblanket is in use. For this reason, the control must never be
covered or placed on the heated overblanket when it is in use.
• It is essential to observe the information relating to the following
chapters: Operation, Cleaning and maintenance, Storage.
• If you should have any questions about using our devices, please
contact our Customer Services department.
15
English

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis