The China Office Soundbar SB60S Schnellstartanleitung Seite 9

8- Instruction for connecting via optical cable
Important: This optical cable is not provided.
Connect the Digital Optical Audio cable to the optical output on the audio source and to the
Optical Input on the soundbar.
- Press the POWER button on the soundbar or POWER button directly on the remote
control (Rem.10) to switch on the unit.
- Press the MODE button on the remote control (Rem.18) to switch to Optical mode
or select the SOURCE button on main unit repeatedly to select the Optical mode.
- Using the remote control on your connected device, make sure the audio settings
are set to PCM or Optical Audio and are turned On. Audio from the connected audio
source will now be played through the speakers.