Occhio Sento sospeso due Montageanleitung Seite 109

Elongated
holes for the
power outlet
Drilled holes
Place the ceiling profile over the
power outlet and against the cei-
ling, and turn it until the elongated
holes are aligned as required.
Mark the positions where the holes
are to be drilled.
Drill two 8 mm diameter holes,
push in the rawlplugs so that they
lie flush and screw in the ceiling
profile ( screws and rawlplugs are
included in the scope of delivery ) .
Ensure that the screws finish flush
with the ceiling profile.
Check the routing of
the power cables.
Caution!
Before fitting, disconnect all
current-carrying lines from the
mains supply.
107