Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
Disassembly and disposal
7.1 Safety information for disassembly and disposal
Improper disassembly
7.2 Disassembly
7.3 Disposal
06.07.2021
WARNING!
Risk of injury in the event of improper disas-
sembly!
Sharp-edged components, tips and corners on the
lifting column or the required tools can cause inju-
ries.
– Ensure that there is sufficient space before
starting work.
– Handle exposed components with sharp edges
carefully.
– Ensure that the work area is clean and tidy at all
times! Components and tools lying around or on
top of one another are sources of accidents.
– Disassemble components properly. Observe the
components' sometimes high net weight. If
necessary, use lifting gear.
– Secure components so that they do not fall
down or topple over.
– Consult with the manufacturer in the event of
uncertainties.
Before starting disassembly:
Physically disconnect the lifting column from the electrical power
n
supply.
n
Dispose of operating materials in an environmentally friendly
manner.
Then clean the modules and components properly and disas-
semble them, adhering to the applicable local occupational health
and safety and environmental protection regulations.
Disposal of the lifting column in Germany is gov-
erned by Elektro-G (RoHS); in the European area
EU Directive 2012/19/EC or the respective national
legislation applies.
Lifting column Multilift I/Multilift II
Disassembly and disposal
Disposal
119
Werbung
Kapitel
Fehlerbehebung
